* The specified mass in running order is a standard value specified in the type approval procedure. Due to manufacturing tolerances, the actual weighed mass in running order may deviate from the value stated above. Deviations of up to ± 5 % of the mass in running order are legally permissible and possible. The permissible range in kilograms is indicated in brackets after the mass in running order. The mass specified by the manufacturer for optional extras is an imputed value determined for each type and layout, which Carado uses to determine the maximum weight available for factory-fitted optional extras. The purpose of limiting the optional equipment is to ensure that the minimum payload, i.e. the legally prescribed free mass for luggage and retrofitted accessories, is actually available for the payload of the vehicles delivered by Carado. The actual weight of your vehicle ex works can only be determined when it is weighed at the end of the conveyor belt. If, in exceptional cases, the weighing shows that the actual load capacity is lower than the minimum payload due to a permissible weight deviation, despite the limitation of the optional equipment, we will check together with your trading partner and you before delivering the vehicle whether we should, for example, increase the vehicle's load capacity, reduce the number of seats or remove optional equipment. The technically permissible total mass of the vehicle and the technically permissible total mass on the axle must not be exceeded. Detailed information and explanations on weight issues and vehicle configuration can be found in the Legal information section.